Welcome to Tiancang Steel (Qingdao) Co., LTD
WhatsApp ：+8618063567430 Email : manager@sdtiancangsteel.com
API Casing
PRODUCT DETAILS
Keyword: Steel Plate
Description
Casing is used for lining the complete borehole which has been dug into the ground to procure oil. Similar to the drill pipe, the oil well casing pipe is also subjected to axial tension, therefore they are required to be made from high-quality strong steel material. OCTG casing is large diameter pipe which are held in place in the borehole using cement.
The diameters of OCTG casing pipe range from 4.5″ to 36″. The well-cemented pipe acts as the structural component of the well and offer hole integrity. They prevent the well from collapsing when the drilling process is on. Good quality, well cemented casing can stay in place for the whole life of the well.
The oil well casing pipe are further divided into:
Conductor Casing – Conductor casing is the first boundary between the surface and the subsurface. It helps prevention of well collapse; it keeps away the groundwater and most importantly provides structural support. Conductor casing is installed in the ground by either drilling it or hammering it down. They are available in sizes ranging from 18″ to 36″.
Surface Casing – The purpose of Surface casing is primarily environmental and to ensure safety. It helps in separating the freshwater zones, offering protection from blowout and supporting the wellhead and blow out prevention equipment. Therefore surface casings are required to maintain very high safety standards. They are responsible for supporting the next casing in line. They may vary in size depending on their purpose, but the most common size of surface casing is 13 3/8”.
Intermediate Casing: Intermediate casing is not always required in all types of oil and gas production. If used, they are placed between the surface and the production casing. They are available in sizes ranging from 13 3/8” to 16”.
Production Casing – Production casing help provide structural integrity and pressure control of the hydrocarbon-bearing sections mainly during the production of oil.
Production Liner – Production liners can be suspended from the production casing or one of the previous casings. They help in reducing the cost significantly as the liner is not required to run through the full depth of the well. Liners can be pre-perforated to help save time and cost.
More casing pipes and their colors
Specification
API 5CT Well Casing Length:
|
API 5CT Casing |
Range 1 |
Range 2 |
Range 3 |
|
4.88~7.62 |
7.62~10.36 |
10.36~14.63 |
Dimension
| Labels | OD(mm) | WT(mm) | J55/K55 | N80 | L80 | C90/T95 | P110 | Q125 | |
| 4 1/2 | 9.5 | 114.3 | 5.21 | PS | - | - | - | - | - |
| 10.5 | 114.3 | 5.69 | PSB | - | |||||
Warehouse Storage
The raw material of seamless carbon steel pipe is a round tube blank, which is cut by a cutting machine into a billet with a length of about 1 meter, and sent to a furnace for heating through a conveyor belt. The billets are fed into the furnace and heated at about 1200 degrees Celsius. The fuel is hydrogen or acetylene. Furnace temperature control is a critical issue. After the round tube blank is released from the furnace, it is pierced through a pressure punching machine. Generally, the more common punching machine is the conical roller punching machine. This kind of punching machine has high production efficiency, good product quality, large amount of perforation and diameter expansion, and can wear a variety of steel grades. After perforation, the round tube blank is successively cross-rolled, continuously rolled or extruded by three rolls.
1. Seamless steel pipe for structure (GBT8162-2008). Mainly used for general structure and mechanical structure. Its representative material (brand): carbon steel, 20, 45 steel; alloy steel Q345, 20Cr, 40Cr, 20CrMo, 30-35CrMo, 42CrMo, etc. 2. Seamless steel pipes for conveying fluids (GBT8163-2008). It is mainly used for conveying fluid pipelines in engineering and large-scale equipment. The representative material (grade) is 20, Q345, etc. 3. Seamless steel pipes for low and medium pressure boilers (GB3087-2008) are used to manufacture various structures of low and medium pressure boiler superheated steam pipes, boiling water pipes and superheated steam pipes, large smoke pipes, small smoke pipes and arch bricks for locomotive boilers Hot-rolled and cold-drawn (rolled) seamless steel pipes of high-quality carbon structural steel for pipes. The representative material is 10, 20 steel.
Packing and shipping
1. OD 219mm and below In hexagonal seaworthy bundles packed by steel strips, With two nylon slings for each bundles
2. above OD 219mm in bulk or according to custom opinion
3. 25 tons/container and 5 tons/size for a trial order;
4. For 20" container the max length is 5.8m;
5. For 40" container the max length is 11.8m.
Customer conversation
In The Future The Company Will as Always Adhering To The customer As The Buddha Are Proud Of The Service Business Philosophy Adhere To The "Create, Win Win" Spirit O enterprise Adherence To The Restraining. Provide The Most Valuable Industry Services. Is committed To Become China's Best Solution External Steel.
Application field
Products are mostly used in construction sites, aviation, shipbuilding, precision instruments, petrochemical and other industries.
FAQ
Q1:Can you send samples?
A:Of course, we can send samples to all parts of the world, our samples are free, but customers need to bear the courier costs.
Q2:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q3:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other ports according to your needs.
Q4:How do you control quality ?
A:We provide Factory Test Report, also support Third Party Inspection.
Q5:How many countries you already exported ?
A:Exported to more than 50 countries mainly from Middle East, Russia, United States, Canada, Italy, Germany, Australia, Egypt, Chile, Mexico, Venezuela, Argentina, Kuwait, Saudi Arabia, UAE, Sri Lanka, Indonesia, Bangladesh, Turkey, India, etc.
Q6:How long does your delivery time take?
A:In general, our delivery time is within 30-45 days, and may be delayed if the demand is extremely large or special circumstances occur.
Q7:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open to the public.
Q8:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.
RELATED PRODUCTS
GET A FREE QUOTE
CONTACT US
Tel : +8618063567430
Email : manager@sdtiancangsteel.com
WhatsApp：+8618063567430
Add : Room 3491, North Side, Third Floor, No. 6, Loushan Branch Road, Licang District, Qingdao City, Shandong Province
GET A FREE QUOTE
Copyright : Tiancang Steel (Qingdao) Co., LTD
SAF Coolest v1.2 设置面板 QROSX-ZRYS-BEAFE-ZES
无数据提示
Sorry，当前栏目暂无内容！
您可以查看其他栏目或返回 首页
